
PRODUCT
SLIDING
Opt for simplicity and free your imagination, with infinite adaptability.
The sliding window is a unique horizontal opening solution. The structure is anodised 25 micron aluminium alloy, in a natural colour finish. As an option, the thermolacquered or anodised versions are available in an infinite choice of colours. The roller bearing system is made from stainless steel specially adapted for projects near the sea. Fixed or sliding, the width of the vertical profile is 22 mm and is only limited by the maximum surface area of the glass. Button-locking available with two-point locking and cylinder locking with key. Motorisation possible.
RANGES
The Vitrocsa sliding version is available in several ranges, adapted to the installation conditions of your projects.
Thermal insulation and large surface areas
Available in 32 or 44 mm double or triple glazed versions, the Vitrocsa TH+ range is for sliding window surfaces of up to 18 m2, with scope for larger panes, depending on the supplier of the glass.
The excellent insulating properties of the profiles, in combination with the glass, enable current low energy consumption standards to be met.
Configuration
- Standard sliding frame (up to 18 m2, or more)
- Sliding invisible frame (up to 18 m2, or more)
- Curved (sliding: minimum radius of 3 m; fixed: minimum diameter of 1.5 m)
- Pivoting (up to 12 m2)
- Guillotine (up to 500 kg per pane)
- Turnable Corner (up to 250 kg per pane, 6 m2)
- Fixed (up to 18 m2, or more)
- Opening angle
- Motorisation
- Mosquito net
Technical details
- Rail + Frames
Available in 32 or 44 mm double or triple glazed versions, the Vitrocsa TH+ range is for sliding window surfaces of up to 18 m2, with scope for larger panes, depending on the supplier of the glass.
The excellent insulating properties of the profiles, in combination with the glass, enable current low energy consumption standards to be met. - Vertical connection
22 mm
Reinforced for very windy locations or installation at high altitudes
- Closure mechanism
One-point closure button (029, 035, 055)
Two-point closure button (092)
Three-point closure button
Cylinder
Range of options for electric closure
Alarms
- Glazing
32 mm or 44 mm
Panel size up to 18 m2 (6 x 3.21 m), with scope for larger panes, depending on the supplier of the glass, vertical or horizontal
Flagship range
The Vitrocsa 3001 range allows for sliding window surfaces of up to 6 m² with 26 mm double glazing.
The first Vitrocsa 3001 window was developed at the start of the 1990s. With the experience we now have, we can guarantee that this system presents no hidden defects.
The roller mechanism and sealing system work perfectly, provided that the window has been assembled in line with good industry practices.
Configuration
- Standard sliding (up to 6 m2)
- Pivoting (up to 6 m2)
- Guillotine (up to 6 m2)
- Fixed (up to 9 m2)
- Opening angle
- Mosquito net
Technical details
- Rail + Frames
Embedded and concealed in the floor, wall and ceiling
Rails just 99.5 mm wide for a birail (mono : 45 mm + 9.5 mm seal)
Saline treatment specially adapted for coastal projects
- Vertical connection
18.5 mm
Reinforced for very windy locations or installation at high altitudes
- Closure mechanism
One-point closure button (029, 035, 055)
Cylinder
Range of options for electric closure
Alarms
- Glazing
26 mm
Panel size up to 6 m2
Slim profile and thermal reinforcement
The V32 range has thermal reinforcement and a glass fibre profile. This range is designed for standard fixed or sliding openings.
Configuration
- Standard sliding (up to 12 m2)
- Fixed (up to 12 m2)
- Opening angle
Technical details
- Rail + Frames
Embedded and concealed in the floor, wall and ceiling
Thinner rails just 124 mm wide for a birail (mono: 56 mm + 12 mm seal)
Saline treatment specially adapted for coastal projects
- Vertical connection
23 mm
Reinforced for very windy locations or installation at high altitudes
Optimised heat retention with fibreglass towers
- Closure mechanism
Two-point closure button (092)
Cylinder
Range of options for electric closure
Alarms
- Glazing
32 mm
Panels up to 12 m2 (4 x 3 m), vertical or horizontal
Infinite surface
The Vitrocsa V56 range allows infinite glazing surfaces using 56 mm thick double or triple glazing. The V56 range is an evolution of our current sliding window systems.
The Vitrocsa V56 window has been developed to keep the same mechanical characteristics of the Vitrocsa systems which have been proving their worth for over 25 years.
Configuration
- Standard sliding
- Opening angle
Technical details
- Rail + Frames
Embedded and concealed in the floor, wall and ceiling
Saline treatment specially adapted for coastal projects
- Vertical connection
22 mm
Reinforced for very windy locations or installation at high altitudes
- Closure mechanism
Two-point closure button (092)
- Glazing
56 mm in double or triple glazing

OUR TECHNICAL BROCHURE
Discover the technical details by downloading the Vitrocsa technical brochure.
OPTIONS
A range of equipment is available as an option:
We offer several solutions for insect-related problems. It is possible to add a rail allowing a mosquito net to be inserted, or a folding canvas to be concealed, offering coverage of 80 cm in the vertical jamb.
In accordance with our philosophy, we developed a motorisation system for all the TH+ guillotine and sliding systems which allows integration into the architectural design with minimum interference, with a simplified and very quiet opening.
The motorisation system is fully hidden in the top part of our Vitrocsa frame and only requires a height of 12 cm. The maximum driving force is 180 N for a maximum weight of 1,200 kg per motor. The maximum motion speed is 167 mm/s-1 and slows when a second leaf is driven. It has an automatic electrical closure which is compatible with all home automation opening systems: electronic lock, push button, badge reader, etc. Our system is undergoing constant development, and new options will be available soon.
To ensure complete safety, the system stops as soon as an obstacle is detected. The motorisation system is also available for the curved and guillotine solutions.
It is essential for us to meet the requirements and expectations of our clients by offering them the highest level of safety. Our product meets the highest standards such as RC2. Various additional components are available to meet other safety requirements:
- Alarm directly integrated into our system
- Control of the closed leaf position
- Glass breakage detector
- Special burglary-resistant glass